Mass spectrometry-based proteomics as an emerging tool in clinical laboratories

Mass spectrometry (MS)-based proteomics have been increasingly implemented in various disciplines of laboratory medicine to identify and quantify biomolecules in a variety of biological specimens. MS-based proteomics is continuously expanding and widely applied in biomarker discovery for early detection, prognosis and markers for treatment response prediction and monitoring. Furthermore, making these advanced tests more accessible and affordable will have the greatest healthcare benefit. This review article highlights the new paradigms MS-based clinical proteomics has created in microbiology laboratories, cancer research and diagnosis of metabolic disorders. The technique is preferred over conventional methods in disease detection and therapy monitoring for its combined advantages in multiplexing capacity, remarkable analytical specificity and sensitivity and low turnaround time. Despite the achievements in the development and adoption of a number of MS-based clinical proteomics practices, more are expected to undergo transition from bench to bedside in the near future. The review provides insights from early trials and recent progresses (mainly covering literature from the NCBI database) in the application of proteomics in clinical laboratories.


Introduction
Proteins are biomolecules that better bridge the gap between genomic information and biologic functions and disease phenotypes [1].Proteins do not function in isolation and major biological processes are mediated through protein interactions that control metabolic and signaling pathways, cellular processes, and organismal systems, hence control the chaotic networks and mechanisms implicated in health and diseases [2][3][4].Proteomics is an integrated research area that is centered on the premise and treatment predictive biomarkers [18].A diagnostic biomarker is used for early detection of the disease.For example, decreased expression of full length amyloid beta (Aβ) peptide and increased tau protein in CSF were reported to be the only clinically validated biomarkers for Alzheimer's disease(see (Olsson et al. (2016)) for a review of these biomarkers) [19].A prognostic biomarker is typically utilized to foretell the recurrence and severity of disease as well as patient's response to treatment by a given drug.Recently, a study by Jang et al. (2021) identified five proteins, HNRNPA1, LTBP4, MRPS23, POLDIP2, and WBSCR16, to be prognostic biomarkers in adrenal cortical carcinoma (ACC) [20].Predictive biomarkers are useful tools to classify the patients into responder and non-responder groups [21], which are all important in drug design applications [22,23].For example, proteins FKBP4 and S100A9 were reported as potential prediction markers of therapeutic response to neoadjuvant chemotherapy in breast cancer patients [24].Furthermore, overexpression of SHP27 was said to predict doxorubicin resistance [25].Many diseases, including cancer, are regulated at the protein level, making the field of proteomics important.Thus, proteins are of great importance in the diagnosis and understanding of most diseases and pathological disturbances that occur, thus having an impact on biomarkers.In the last decade, the US Food and Drug Administration (FDA) has approved a number of MSbased in vitro diagnostic methods for pathogen identification, newborn screening, quantification of therapeutic drugs in the circulation, and vitamin D assay [26].
Liquid chromatography (LC) coupled to tandem MS (LC-MS/MS) is the most widely used technique for the comprehensive identification and quantification of proteins.In this technique, proteins from biological samples are isolated and enzymatically digested into peptides, most commonly with trypsin, before separation by LC and electrospray ionization to enter the mass spectrometer.Peptide identification occurs through determination of the mass to charge ratio (m/z) of precursor ions in MS1 spectra, selection, and fragmentation of precursor ions in a collision cell, then determination of the m/z of the product ions generated from collision in MS2 spectra.Finally, protein identification is inferred from analysis their respective peptide data [27,28].The exact identification and quantitation of proteins are essential for a better understanding of biological processes implicated in health and disease.
Precise multiplexed quantification of proteins can be achieved by targeted proteomic methods using multiple or parallel or selected reaction monitoring (MRM/PRM/ SRM).MRM rely on a triple-quadrupole (QQQ) MS to allow passage and analyses of only predefined targeted proteotypic peptides, by specifically selecting precursor ions in Q1 and their specific fragment ions in Q3 as predefined mass to charge (m/z) values [29].The signal intensities of SRM transitions (precursor/fragment ion pairs) of the unique peptide can be monitored over time and are efficient as surrogate measures of the quantity of a specific protein.The method has high repeatability, reproducibility and broad dynamic range enabling excellent absolute and relative protein quantification across multiple biological samples, especially in the area of biomarker research [30].These targeted proteomics strategies are used both in biomarker validation and in accurate and specific quantification of several biomarkers [31].Mermelekas et al., (2015) has presented a summary of validated urinary biomarkers in different diseases, including cancer and diabetes, using SRM/MRM assays [31].Jones et al., (2016) has developed MRM assay and quantified 187 candidate marker proteins for colorectal cancer (CRC) [32].Kontostathi et al., (2019) has presented a summary of studies based on MRM targeted proteomic assays to discover and validate diseases specific biomarkers in plasma samples [33].The application of this powerful tool is limited by its relatively low throughput.
Data-dependent acquisition (DDA) and data-independent acquisition (DIA), are other two discovery platforms used in the identification and quantification of proteins [34].DDA is the most widely used approach where quantification is achieved by combining DDA with stable isotope labeling [34].This technique has poor reproducibility due to due to random ion sampling especially when assessing large number of samples [27,35].In DIA, for example, sequential windowed acquisition of all theoretical fragment ion spectra mass spectrometry (SWATH-MS), allows comprehensive detection and quantitation of virtually every detectable compound in a sample, thereby eliminating the risk of missing a critical component and overcomes some of the limitations of DDA [35][36][37][38].The introduction of ultrafast scanning high-resolution Q-TOF instruments led to the emergence of this novel MRM-like method, SWATH-MS based label-free quantitative proteomics, which is a faster and higher throughput alternative that can detect 30,000-40,000 peptides across large sets of samples [38,39].Instrumental parameters such as the size of the precursor mass windows or the resolution can be modified to improve protein depth and analytical precision in a DIA-MS method [40].Furthermore, the type of LC column and the length of separation gradient can each alter the number of peptides detected and their resolution.A study by Chang et al., (2015) reported 30 differentially expressed proteins from a label-free SWATH analysis of synaptic proteome in between Alzheimer's disease patients and controls [41].Kim et al., (2018) developed a targeted DIA assay and detected candidate biomarker KRAS mutations to predict therapy response [42].Anjo et al., (2017) briefly summarized the clinical and fundamental researches based on SWATH-MS, which led to the identification of a number of candidate biomarkers for different diseases [43].A recent review by Boys et al., (2023) presented several studies based on DIA-and DDA-MS for the discovery and validation of different biomarker categories [34].
Current developments in sample preparation methods, protein quantitation strategies, MS configurations and data analysis have all been essential to address the clinical questions that advance the discovery and validation of clinically-relevant diseases biomarkers (Fig. 1) [17,28,44].These progresses in MS related technologies, sample preparation methods, labeling reagents, stable isotope labeling reagents and peptide synthesis technologies, and bioinformatics have led to identification and quantification of several thousand proteins in one experiment with steadily improved sensitivity, resolution and specificity propelled proteomics into the clinic [12,15,[45][46][47].
Sample preparation an important step in the proteomic characterization of clinical samples to simplify complex biological matrices (serum, urine, etc.), adjust analyte concentration(s) for the detection limit of the LC-MS/ MS, exchange the sample matrix to a simpler solvent/ water injection solution compatible with the LC method [28,48].The most commonly analyzed biofluids include blood (plasma, serum) and urine [49], expressed prostatic secretions [50], saliva [51], tears [52], cerebrospinal fluid (CSF) [53], and ascites [54,55].Rigorous and purposedesigned standard operating procedures are required for the diverse types of clinical samples in a non-invasive or minimally invasive manner (i.e.liquid biopsies) [28,56].Furthermore, sample preparation protocols in MS-based clinical laboratories have to deliver the desired cost/ reportable test, practicality and robustness [48].Antibodies are often used in targeted proteomics to quantify low abundant peptides (on the order of pg/mL in blood) [57].For clinical applications, sample preparation and LC-MS has to be integrated into the system [47].One of the barriers in implementing MS in clinical laboratory has been the challenge of interfacing MS and automated sample preparation instruments to laboratory information systems (LIS) for electronic order and result transmission.Formalin-fixed paraffin-embedded (FFPE) tissue represents the gold standard non-liquid matrix in clinical analysis, enabling the long-term storage of samples and the generation of large tissue banks [58,59].The formation of amine-thiol cross-linking and methylene bridges inactivate enzymatic activity, thereby stabilize the biomolecules within the tissue.Mass spectrometry-based proteomics relies on protein digestion and peptide purification.The application of this technique on FFPE tissues requires reversal of chemical cross-linking and the removal of reagents that are incompatible with mass spectrometry using the appropriate protocol [60].There is no a universal sample preparation protocol and the type of method should be optimized/selected based on the sample type and complexity, and the goal of the study [28].Different cocktails of reagents including calibrators, quality control samples and ready-to-use solvents are now commercially available for the cell lysis, protein extraction and solubilization from clinical samples, as revised in different papers [28,[61][62][63].
Electrospray ionization (ESI) continues to rely on wellestablished reversed-phase nano-LC technologies, or combined with capillary electrophoresis [64].Orthogonal peptide separation techniques using reverse-phase LC and strong cation exchange chromatography have grown in popularity amongst clinical proteomics research.Fractionation of peptide pool using this approach has been reported to increased proteome coverage over a singleshot experiment by up to 39% in lung cancer cell lines [65].Stone, L. 2017, has described the different LC-MS/ MS sample preparation types used in clinical laboratory [48].Ion mobility based separation of gas phase peptide ions, as in high-field asymmetric ion mobility spectrometry (FAIMS) and trapped ion mobility spectrometry (TIMS), have been shown to reduce MS1 complexity and MS2 contamination from co-eluted and co-isolated peptides [66,67], thereby increasing peptide detection by 30% [68].
Some of the recent developments in clinical proteomics sample preparation include filter aided sample preparation (FASP) [69,70], MStern [71], suspension trapping (S-trap) [72,73], the solid-phase-enhanced sample preparation (SP3) [74][75][76][77] and the in-StageTip (iST) [78].Comparative studies have been performed to see the performance between the above listed methods [79,80].Compared to in-solution digestion, the FASP-based methodology is efficient to remove contaminating small molecules and salts including SDS prior to mass spectrometry analysis [79,80].Besides, FASP requires relatively high salt concentration for elution of the tryptic peptides, which requires a desalting procedure before MS analysis.Furthermore these additional handling steps are potentially associated with peptide losses [71].The S-Traps method provide the most efficient protein digestion and identification in a shorter time when compared to FASP and in-solution digestions [79].The in-StageTip-based sample processing is performed in a single, enclosed volume, which eliminates the potential of contamination and sample loss [78].The method based on MStern utilizes the strengths of filter-based sample preparation methods and overcomes their limitation, without the compromising the protein identification in improved throughput [71].The SP3 protocol uses a hydrophilic interaction mechanism for removal of unwanted sample components.It is reported to be simple and efficient protocol to analyze simple and complex protein mixtures in large and very small amounts, which can be easily completed within ~ 30 min [81].
Further developments in the MS equipment configuration have propelled clinical proteomics to the next level, thereby hasten the transition of MS from analytical chemistry laboratories to the clinics.This is achieved mainly due to the development of high-and ultrahigh resolution accurate-mass (HRAM) spectrometers, such as time of flight mass spectrometry (TOF MS), Fouriertransform ion cyclotron resonance MS (FT-ICR MS), and Orbitrap (Orbital ion-trap) [82][83][84][85][86][87].The major enhancements in HRAM are made to the ion source, ion transmission, instrument tuning (for sensitivity improvements), detector adjustments, ion optics, electronics, and detector acquisition speed (for increased resolution).Advanced ionization process, operating system, and the required reagents including calibrators, quality control samples and ready-to-use solvents are now commercially available.Several ionization methods, such as desorption electrospray ionization (DESI) [88], probe electro spray ionization (PESI) [89] and rapid evaporative ionization mass spectrometry (REIMS) [90] have been used for intraoperative rapid pathological diagnosis and real-time analysis of biological samples [47].Overall, a number of achievements are made in MS fragmentation and detection techniques and MS scanning modes as described in Macklin et al., (2020) [28].
For example, ion mobility MS combines the separation of ionized molecules based on their mobility in a carrier buffer gas, with the high-accuracy resolving power of HRAM.In trapped ion mobility, the ions are MS trapped during ion mobility separation, which allows for sequential fragmentation over a series of timed millisecond scans.Combining trapped ion mobility with parallel accumulation-serial fragmentation (PASEF) enables the selection and fragmentation of multiple precursors in a single 50 ms run, resulting in thousands of protein identifications over a short run time using nanogram amounts of material without a decrease in sensitivity, ideally suited for complex, high-throughput proteomics.A recent advancement has been made in trapped ion mobility MS that combines time-of-flight and trapped ion mobility MS (timsTOF) with liquid chromatography and improved automation software.Some of the recent achievements are also described below under chapter "Mass Spectrometry-based Clinical Pathology".
The analysis of large and complex/heterogeneous biological data generated from MS experiments require the development of computational tools (new software and algorithms) to analyze and statistically evaluate data.In recent years there are also developments in tools and methods used to process the raw mass spectral data, including global and targeted identification and quantification of peptides and proteins.For example, a team from the Max Planck Institute of Biochemistry released a new version of the pioneering and widely used Max-Quant software platform, MaxQuant 2.0., for analyzing and interpreting data produced from MS-based proteomics research [91].Chen et al., (2020) revised a number of recently developed bioinformatics tools used in MS-based proteomics data analysis [92].
MS-based proteomics is implemented in clinics to understand the pathophysiology of several diseases that include infectious diseases, antimicrobial susceptibility testing, phylogenetic classification, urine toxicology screening, new-born metabolic screening, clinical metabolic profiling and non-communicable pathological conditions such as cancer, metabolic disorders, amyloidosis, disorders of the immune system, and characterization of renal diseases, reproductive diseases, blood disorders and ocular diseases [46,93,94].The main purpose of the manuscript is to discuss the major achievements, challenges and future prospects in MS-based clinical proteomics.It covers some of the recent technologies in clinical pathology, like MSI and emerging in vivo techniques, and applications related to communicable diseases caused by microbial pathogens (bacterial, viral and fungal diseases) and non-communicable pathological conditions (cancer and metabolic disorders).

Biomarker discovery workflows
Biomarker research follows a continuum that begins with the putative biomarker discovery, and proceeds through candidate prioritization, verification and validation to the eventual clinical application and post-implementation monitoring.The discovery phase requires high confidence identification and simultaneous quantification of biomarker candidates, which gives clues about proteins that shows statistical significant changes in response to a given environmental change, drug treatment.Identification of medium to low abundance proteins without enrichment from complex biological samples is one of the biggest challenges in biomarker discovery [95].The discovery phase generates 100 to 1000 s of candidates and the candidates that show significant differences between cases and controls have to be prioritized.Furthermore, proteins secreted or on the cell surface, acting in known cellular pathways or hypothesized to be deregulated in the diseased state are targeted for testing [96].
Alternatively, targeted proteomics approaches like the multiple reaction monitoring (MRM) MS/MS multiplexed assays and Stable Isotope Standard with Capture by Anti-Peptide Antibodies (SISCAPA) can be used to prioritize selected biomarker candidates for validation [97][98][99].The identified and prioritized candidate biomarkers have to be validated in a larger sample size covering a broad section of patient cohorts.A high throughput workflow with high specificity and sensitivity is employed in verification phase to confirm the identification and screen only fewer but higher quality leads into the costly validation phase.The validation phase assesses the biomarker performance characteristics in real clinical practice, and determines the range of conditions under which the biomarker will deliver high-quality, reliable and reproducible research data necessary for the effective use of biomarkers [96].The MS-based biomarker research and development approach may solve several vexing issues with the conventional immunoassays; accuracy, selectivity, specificity and multiplexing (MS can measure > 100 peptides at a very little incremental cost per added analyte) [100,101].Besides, the MS-based approach performs a direct measurement of analytes with wide dynamic range [101].
Recently, a fully automated, clinically validated HPLC-MS/MS in MRM mode has been reported for identification and quantification of wild-type and variant amyloid β (Aβ) peptides in cerebrospinal fluid of alzheimer's disease (AD) [102].Examples of target analytes and clinical areas are summarized by van der Gugten, J. Grace, (2020) [101].Chambers et al., (2014) and N. Leigh Anderson (2010) have presented a list of FDA approved or cleared cancer biomarkers based on targeted proteomics [100,103].Some of the FDA approved MS-based protein biomarkers are shown in Table 1 below.
Clinical proteomics has the ability to delineate the functional units of a cell, more likely driving the phenotypic differences of a disease.Despite the recent advances in the area of technology development/standardization and bioinformatics to enable confident identification of molecular disease signatures, major roadblocks have been impeding an efficient transition of protein candidates in to clinical biomarker with only few biomarkers have been approved by the FDA over the last two decades [108].This is in contrast with over a thousand claimed biomarker candidates reported in scientific literature for cancer alone, indicating a discrepancy between discovery and validation.Several resources are available for determining development processes and acceptability criteria for specific LC-MS/MS assays, and many of them are general recommendations or are specific to research applications that may not translate clinically [109].
Several barriers attributable to this discrepancy has been identified, including a lack of high quality, wellannotated biospecimens, measurement inconsistency and a lack of reproducibility within and across proteomic platforms (analytical challenges), difficulty in verifying biomarker candidates before large-scale clinical trials using immunoassays, uncertainty of how to successfully develop and validate a method that meets guidelines required by the regulatory agency, lack of publicly accessible, high-quality affinity reagents, reference materials, and data sets for data mining, hypotheses generation, and experimental validation prior to clinical validation, lack of standardized data analysis, instrumentation/automation challenges, standardization and harmonization of MS methods and visualization tools and lack of appropriate statistical and experimental study design [108,109].An improved understanding of the challenges and strategies in each stage of the pipeline is fundamental for accelerating the pace of biomarker development and facilitating the implementation of novel clinical tests.Successful application of proteomics in clinics requires implementation of standards and metrics to ensure that observed changes are reflective of true disease biology, followed by proper large-scale validation.

Comparative proteomics in medical research
Most clinical proteomic studies rely on determination of differences in relative protein abundance in two or more conditions in a quantitative or qualitative manner [110][111][112].For example, in expression proteomics-based biomarker discovery, biomarkers are detected through comparison of protein expression profile between normal samples vs. disease samples like body fluids and tumor tissues [21].In general, comparative proteomics aims to analyze proteome changes in response to development, disease, or environment in a two-step process involving protein fractionation and protein identification by mass spectrometry [113].The choice of MS instrument varies depending on the clinical application.For example, triple quadrupole mass spectrometers coupled to liquid chromatography are often used for quantitative analysis of most of the small molecules for newborn screening, therapeutic drug monitoring, vitamin D, and steroid assays, while matrix-assisted laser desorption/ionization (MALDI) combined with time-of-flight (TOF) mass analyzer is generally used for clinical microbiology and [26,114].Furthermore, SRM and PRM performed on high-resolution hybrid quadrupole-Orbitrap (Q-OT) or time-of-flight instruments are routinely used for targeted quantification of proteins in a complex biological matrix [115,116].

Mass spectrometry-based clinical pathology
More recently, mass spectrometry-based assays are becoming more popular in clinical diagnostic laboratories and have emerged as a promising tool for modern pathology [46].Technological advancements that aid its practicality in pathology and clinical diagnostics include the cocktail of variations in the mass spectrometer configurations, for example, as in mass spectrometry imaging (MSI), emerging in vivo techniques, paper spray ionization mass spectrometry (PSI-MS) and MS miniaturization [117,118].In contrast with other established analytical assays, mass spectrometry-based assays offers high analytical specificity and sensitivity, improved diagnostic accuracy, low sample cost and multiplexing opportunities as it can identify and quantify multiple analytes in a high-throughput manner from complex samples, such as pathology specimens [46,[119][120][121].Furthermore, it analyzes tissues directly without the need of time-consuming multiple staining and microscopy steps; significantly reducing the time to diagnosis or even it can be used to guide intraoperative tumor excision [121].Furthermore, significant progresses have been made in the use of MS-based clinical pathology for the identification and confirmation of localization of renal protein deposits, thereby, help in diagnosing of amyloidosis and characterization of renal diseases [46].

Mass spectrometry imaging (MSI)
Mass spectrometry imaging (MSI) is an emerging analytical technique that has revolutionized biomedical and pharmacological investigations and allows simultaneous detection and visualization of the spatial distribution of biomolecules across the tissue specimens in a labelfree untargeted manner for multiplex analysis [26,122].Desorption Electrospray Ionization (DESI) and MALDI are the most common ionization techniques used in MSI [123][124][125].MSI combines the advantages of microscopic techniques and discovery-based approaches while enabling spatiotemporal analysis of complex biological samples with multiplex detection [126].Imaging experiments are carried out by first scanning the tissue surface in 2D, then recording the mass spectral data pixel-bypixel, which are then plotted to create the ion images [26].
The results can be displayed as single or multiple ion images producing molecular histology-like datasets.The information gained from MS and visualization of spatial distributions in thin sample sections makes MSI a valuable tool for biological specimen characterization, which provides a better understanding of the molecular basis and mechanism of diseases with relation to tissue morphology [46,122].Today, the scientific community uses a variety of MSI methods to investigate the distribution of proteins, peptides, and small-molecule metabolites in various biological models.
Today MSI has emerged as a valuable tool with several clinical applications in the context of disease characterization, drug development, biomarker discovery, diagnosis, and prognosis [125][126][127][128].For instance, MSI can be used in biomarker discovery, to determine the location of the biomarker in the tissue section for differentiating between cancer and healthy specimens, tumour typing and disease staging, assessing tumor margins from excision biopsies, intraoperative tumour excision, drug localization, potential therapeutic targets, therapy prediction and diagnosing a number of other diseases [46,123,124,[129][130][131][132][133].Thus, it is evident that MSI is making a stronger impact on the clinical decision-making process.The majority of human studies employing MSI focused on cancer and the effectiveness of this technology in other diseases (renal, infectious, skin, fertility, transplantation, and metabolic diseases) needs to be assessed in the future [26,123].
Until recently, MSI in cancer had been performed exclusively on fresh frozen tissues.It was believed that proteins were inaccessible from the FFPE tissues.Optimized protocols has been developed to overcome the limitations and equal number of proteins can be identified from both fresh frozen and FFPE tissues, with each sample type having unique advantages and limitations as revised [127,134,135].Proteolytic digestion can be done directly on fresh frozen samples, without the need for prior retrieval steps.However, fresh samples require rapid freezing to inhibit endogenous enzymatic degradation.It also requires additional careful cleanup steps to remove other biomolecules that may interrupt the detection of peptides.Using the FFPE samples, on the other hand, very large sample banks can be developed and stored at room temperature for indefinite periods of time without loss of morphological information.The challenge with FFPE samples is formation of methylene bridges and protein cross-linking caused by the formalin fixation, which makes proteins inaccessible to proteolytic digestion and must be reversed prior to further preparation steps using the widely used heat-induced antigen retrieval method.
The current state and further challenges of routinely implementing MSI in the clinical pathology laboratory are presented by experts in the field [133,136].Overall, MSI has high sensitivity, chemical specificity, fairly high spatial resolution, and the ability to detect multiplex molecular information.This makes MSI a powerful medical imaging tool that could be useful as an adjunct to histology for disease diagnosis [26].

Emerging in vivo techniques
Current MSI-based methods requires sample preparation steps, have relatively higher turnaround time and limited application in the assessment of processed tissue specimens.For the proper implementation of MSI for routine clinical use, there is a technological demand for direct, real-time and rapid analysis of unprocessed samples at atmospheric pressure with a simpler sample preparation, simpler instrumentation.These improvements made the MSI-based in vivo analysis as an attractive and feasible choice.More than 40 ambient ionization techniques, including Rapid evaporative ionization MS (REIMS), have now been described in the literature since the last decades [117,133,137].REIMS was originally developed and integrated to routine clinical use for accurate identification of tumor tissues during surgery [138][139][140][141].A number of REIMS-based non-destructive methods have been developed with high sensitivity and specificity to analyze and identify tissue samples in vivo and ex vivo without sample preparation and in real time [46,142].These include REIMS-associated endoscopy (iEndoscope), MasSpec Pen and the intelligent knife (iKnife) [46,117,139,140,142,143].

Diagnosis of infectious diseases
In the last decades, the field of microbiology has benefited from continued technological advances in MS and proteomics-based technologies which are increasingly used to characterize the molecular details of pathogenhost interactions and provide insights into the biological basis of infectious diseases [144][145][146][147]. MS-based clinical proteomics-based proteomics have been used for rapid identification and typing of viral, bacterial and fungal pathogens [4,[148][149][150].In the microbiology laboratory, the development of MALDI-TOF allowed for the rapid microbial identification and strain typing, epidemiological studies, detection of biological warfare agents, detection of water-and food-borne pathogens, and detection of antibiotic resistance [4,121,148,151,152].Furthermore, MS could be combined with machine learning algorithms to provide surveillance of airborne pathogens.
Proteomics has immense potential in characterizing protein profiles of pathogens to find a deeper knowledge of dysregulations in infection disorders, bacterial resistance and virulence -and monitoring the emergence and spread of microbial pathogens, achieve a deeper insight into pathogenesis, develop therapeutic techniques and identify new targets for future drugs [4,[153][154][155][156][157][158].In 1996, Holland et al. showed the first MS-based protein profiles from whole cell bacteria that could be used to differentiate various species [159,160].Automated, standardized protocols and software packages for the analysis of bacterial MS data are available, which can be easily adapted by microbiology laboratories using either academic or commercial protocols [149,161].Database upgrades and sample enrichment are essential elements to refine the MS-based proteomics and increase its power [162].For example, the company claimed that MALDI Biotyper CA System can identify 210 species or species groups, covering a library of 280 clinically important bacteria and yeast species, and representing more than 98% of the typical bacterial identification workflow of clinical microbiology laboratories.The applications of proteomics in clinical laboratory setting is summarized in Fig. 2, modified from Greco, T. M., & Cristea, I. M. (2017) [144].

Diagnosis of bacterial infections
One of the analytical challenges in clinical microbiology is rapid, unambiguous identification of microorganisms and the distinction from closely related species [163].As a result, frequently additional methods are required to verify a tentative identification.MS-based methods relay on sequence-based identification, where identification of the species is supported by multiple discriminative peptide sequences that allows unambiguous identification of all infectious agents in the database used to interpret the obtained MS data [163,164].The microbial identification by MS has revolutionized the way the pathogenic microbes are identified from the culture of human specimens [165].This device intercepts characteristic proteome fingerprints of a pathogen and matches them against the reference library spectra for identification with a comparable accuracy to that of a nucleic acid sequencing methods, but with better speed, easy operation, robustness, and cost-effectiveness [26,165].
MS-based proteomic techniques have identified two secreted serodiagnostic antigens, in vitro by common Fig. 2 Overview of proteomic strategies and their application in infectious diseases research, modified from Greco, T. M., & Cristea, I. M. (2017) [144] Mycobacterium tuberculosis clinical isolates, which are potential candidates for a kit-based serum screening test [121,166].Many studies have demonstrated that MSbased proteomics can detect blood stream infections in shorter time and better accuracy that the conventional diagnostic methods [104,[167][168][169][170][171].Guembe et al. (2014) has also reported that MALDI-TOF MS can perform better than conventional culture methods in diagnosis of catheter-related bloodstream infections [172].Furthermore, liquid chromatography coupled to tandem MS (LC-MS/MS) is applied in a multitude of important diagnostic niches of laboratory medicine [163,164,171,173,174].It has been shown that diagnostics based on this method required minimal processing time and identified multiple uropathogens from urine samples [173][174][175][176][177][178][179].Culture based diagnosis of infectious diarrhea in laboratory is a costly and time-consuming process requiring 3-5 days for detection and identification of enteric bacterial pathogens in the stool samples.Diagnosis of infectious diarrhea based on MS shorten the turnaround time of the test to 30 min [180].Early diagnosis is critically important in diseases like bacterial meningitis, which is a neurological emergency.MALDI-TOF MS has been used for direct detection of the bacteria causing meningitis in cerebrospinal fluids [181][182][183][184]. Singhal et al., (2015) has presented the list of bacterial pathogens in which MALDI-TOF MS was effectively used for identification and strain typing [148].The clinical application of MALDI-TOF MS in china was first approved in 2012 [148,185].The two FDA-approved systems, Vitek MS and MALDI Biotyper, are proven to deliver rapid, accurate, automated, high throughput and cost-effective identification of bacteria and yeast with a library size of 572 and 406 strains, respectively [148,186,187].
Rapid diagnosis antimicrobial resistance is critical for the selection of optimal antibiotic treatments and better outcome of infection.MS-based proteomic have been proposed for rapid detection of antimicrobial resistance [188,189].Florio et al., (2020) has reviewed several MALDI-TOF MS-based methods that have been proposed for rapid detection of antimicrobial resistance [189].Aleshukina et al., (2022) has identified promising markers of resistance for Pseudomonas aeruginosa and Staphylococcus aureus using a MALDI-TOF MS-based approach [190].Furthermore, Weis et al., (2022) has shown the applicability of MALDI-TOF mass spectrabased machine learning approach in predicting antimicrobial resistance in clinically important pathogens [191].Finally, Charretier & Schrenzel have discussed the practicality of MS to identify antimicrobial resistance mediated by horizontal gene transfers or by mutations that affect the quantity of a gene product, and the challenges to identify resistance mediated by target mutations in bacterial pathogens [192].

Diagnosis of viral infections
The use of MS in virology is still limited due to the relatively low protein content of viruses, higher molecular weight of viral proteins and a probable carryover of debris of the cell substrate in which viruses are cultured in vitro [193].Despite the challenges, MALDI-TOF MS has been used in virology for viral identification and genotyping, subtyping, and epidemiological studies [148].For example, several studies have proved the potential of the technique in the diagnosis of various viral pathogens like influenza viruses, enteroviruses, human papilloma viruses (HPVs), herpes virus, and hepatitis virus with a better sensitivity and lower limit of detection [194][195][196][197][198]. Proteomic analysis of sera from patients with severe acute respiratory syndrome (SARS) has identified higher concentrations of truncated forms of Alpha-1 antitrypsin in the sera of SARS patients compared with healthy controls [199].Some MS platforms have been shown to detect 60 HBV variants with accuracy and low detection limits [200].Later, Peng et al., (2013) and Calderaro et al., (2014) have proved the application of the technique in identification and typing of human enteroviruses associated with hand, foot and mouth diseases and poliovirus, respectively [201][202][203].
MS-based proteomics has also been used for studying emerging and re-emerging viral infections like HIV-1, CCHFV, ZIKV, and DENV, coronaviruses (MERS-CoV and SARS-CoV) as well as the recent SARS-CoV-2 pandemic [156].Recent studies have shown the effectiveness of MS-based of protein biomarkers with the aid of machine learning algorithms for the diagnosis of SARS-CoV-2 with an accuracy of 93.9% [117,[204][205][206][207]. The development of direct sampling ionization MS using paper spray systems and robotic handler minimize the time spent for sample preparation steps to allow rapid diagnosis of hundreds of SARS-CoV-2 samples with in a day in large clinical sample cohorts [208,209].Several academic laboratories and industrial partners have established a Cov-MS consortium to translate the technology from analytical laboratories to clinics [210].The Cov²MS assay was developed to diagnose SARS-CoV-2 nasopharyngeal swabs, saliva and blood plasma with a higher sensitivity and proved to be reproducible across different laboratories [211,212].The assay can be used to monitor dozen pathogens in pooled patient samples for early warning system for impending epidemics and pandemics and subsequent rapid development of vaccines and diagnostics [212,213].
This will provide essential insights in investigation of disease pathogenesis and markers which may serve as potential diagnostic tools, antiviral drug and vaccine targets [156,214,215].Finally, some studies have been conducted and proved the efficacy of MS-based proteomics to be a sensitive and rapid method for the detection of drug resistance against antivirals, for example, resistance to ganciclovir in cytomegaloviruses [216].

Diagnosis of fungal infections
The molecular diagnostic methods based on 18 S rRNA and the internal transcribed spacer regions 1 and/or 2 (ITS 1/2) are labor-intensive and time-consuming [217,218].MS-based fungal identification has moved at a slower pace than in bacteria, due to their inherent biological complexity and co-existence of different fungal phenotypes in the same organism [219].Furthermore, fungal proteomics require standardized protocols/parameters like culture media, quantity/type of colony material and incubation time and cells might require additional treatment along with beating with beads to disrupt strong cell walls [148,220].Limited work has been reported on the use of MALDI-TOF MS in fungal strain typing or to determine antifungal drug susceptibility [218].
MS-based clinical proteomics is proved to be a rapid and accurate technique for the identification of both diagnostic biomarkers for fungal infections and therapeutic targets, strain typing, taxonomy and to determine antifungal drug susceptibility [148,218,[221][222][223].Amiri-Eliasi and Fenselau ( 2001) have reported the first application of the technique for identification and characterization of single-celled fungus, Saccharomyces cerevisiae [224].Later, several researchers have reported MS-based proteomics to be a reliable and time-saving approach for identification of various yeast species in bloodstream infections [225][226][227], and in detection of various human fungal pathogens, as revised in Singhal et al., (2015) [148].Direct MALDI TOF-MS analysis of aliquots from positive blood cultures allowed rapid and accurate identification of the main Candida species, thus obviating the need for sub-culturing on specific media [228].Recent studies have optimized MALDI-TOF-based proteomics to identify filamentous fungi at the species level, provided that an appropriate database is available [229][230][231][232][233][234].The protocols have been optimized for routine diagnosis of filamentous fungi and dermatophytes only after 2010 [230][231][232][233][235][236][237][238][239][240][241].Commercial products available in Europe and America for routine diagnosis of fungal infections include, Saramis, Vitek MS, the Andromas MS, and the Bruker MALDI Biotyper.The performance of each technique is tested by several publications, as reviewed by Normand et al., (2017) [106,229].
Prediction of antimycotic resistance in fungi by MS has not advanced as much as it has, in predicting resistance bacteria, might be due to absence of drug degrading enzymes [148].A few species Candida (C.glabrata or C. krusei and C. parapsilosisis) have been reported to be intrinsically resistant to azoles and echinocandins respectively [242].Species-specific resistance has been reported in many molds and zygomycetes [243,244].Therefore, antimycotic resistance in fungi may be predicted simply by identification of the inflicting fungal species by MALDI-TOF MS [242].

Mass spectrometry based proteomics in cancer diagnosis
Cancer is the second leading cause of death after cardiovascular disease and poses a major problem to healthcare systems globally [245][246][247].Current research focuses on the biomarker discovery and validation to enhance early detection, discovery of biological pathways, integrations with available genomics/transcriptomics profiles, appropriate classification of risk groups, treatment selection, therapy monitoring and prognosis in oncology clinic, which resulted in a gradual reduction in cancer mortality rates [15,28,[245][246][247].Despite the major achievements of genomic studies in cancer prognostics, treatment and diagnostics, it only provides a static image in the process of carcinogenesis [14].Clinical research based on genomics and transcriptomics have identified numerous cancerdriving genes.The major limitation of transcriptomics dataset is that molecular differences between cancer cases and healthy controls or different stages of cancers is positively, but weakly, correlated with protein expression, which makes it difficult to directly translate to our understanding of disease biology [28,62,[248][249][250].On the other hand, proteins are ideal predictors of disease progression as they are directly involved in most biological processes and also the active targets of most cancer therapeutics [28,251,252].This discordance arises due to the high dynamic and complex nature of proteome regulation [28].For example, protein expression is affected by alternative splicing, SNP's, transcript degradation, protein-protein interactions and degradation rates and post-translational modifications (PTMs) and requires an accurate detection technique to be used in clinical setting [28,253,254].
The diversity in cancer subtypes and their metastatic potential in progression of malignant cancers pose a challenge in the development of successful therapeutics [255][256][257].For example, several studies have shown over 30 different of ovarian cancer subtypes, each of which arise from a different cell and has its own unique proteome [258][259][260].This makes cancer diagnosis and prognosis beyond the scope of microscopic examination [261].
Proteomics has been introduced more than a decade ago to study more the dynamic molecular entities involved in cancer development and to reveal novel biomarkers of diseases.Most studies in oncoproteomics field focused on protein expression profiling across different biological groups with the aim to identify biomarkers that can be used for detection, stratification or prognosis of cancer and cancer therapies [14].According to National Cancer Institute (NCI), a biomarker is a biological molecule found in blood, other body fluids, or tissues that provides an indication of a normal or abnormal physiological process, or the state of disease [28].For example, during cancer progression, qualitative and quantitative changes in protein profiles occur both in tissues, blood and other body fluids [262].Thus, clinical proteomics may provide the most accurate reflection of the tumour's physiological state [28].Despite the little impact of oncoproteomics on patient management and clinical decision-making to date, the search for cancerrelated biomarkers with proteomics has major potential to improve risk assessment, early detection/diagnosis, prognosis, pharmacodynamics, recurrence and prediction -treatment selection and monitoring [14].
A collaborative research by the National Cancer Institute's Clinical Proteomic Tumor Analysis Consortium (CPTAC) performed an integrated large-scale proteogenomic analysis to understand the molecular basis of different cancer types, including colorectal, breast and ovarian cancer [263].The milestones and several NCIsponsored research outputs from CPTAC participating partner institutions between 2009 and 2021 are published in their website https://proteomics.cancer.gov/resources/milestones-and-publications.The Proteomics Standards Initiative from the Human Proteome Organization (HUPO-PSI) has released recommendations concerning minimal information about a proteomics experiment to increase independent reproducibility of published data and the NCBI has taken a lead role in this standardization process [15,264,265].Furthermore, the Early Detection Research Network was established for streamlined discovery and evaluation of promising biomarkers and technologies [15].Liquid chromatography-mass spectrometry (LC/MS) is a widely used technique for the discovery of sensitive and specific biomarkers associated with cancer [254].This technology enables quantitative analysis of proteins using either label-based or label-free approaches [262,266].The label-free and label-based (using isobaric labeling, such as isobaric tags for relative and absolute quantification reagents, (iTRAQ) and tandem mass tag reagents, (TMT)) approaches have been widely used in cancer biomarker discovery and validation [267].For example, a recent label-free quantitative proteomics study by Gautam et al., (2022) identified 16 protein biomarkers, including C-reactive protein, Carbonic anhydrase-1, and Fibronectin as putative biomarkers of oral squamous cell carcinoma (OSCC) [268].Moulder et al., (2017) and Westbrook et al., (2014) presented many candidate protein biomarkers discovered in multiple diseases using isobaric labeling approaches [269,270].Proteomics-based technology can identify key information like protein targets and signaling pathways related to drug resistance, growth and metastasis of cancer cells [262].
MS-based proteomics have been applied to study many cancer types, including prostate [271,272], breast [273][274][275], melanoma [276,277], lung [278][279][280], ovarian [281,282], and oropharyngeal carcinoma [283].Furthermore, dedicated oncoproteomic reviews have been published for several malignancies, including colorectal cancer [44], breast cancer [284], prostate cancer [285], head and neck cancer [286], and lung cancer [287].Clinical proteomic studies compare the proteomic profiles from cancerous tissue samples with "healthy" controls from the same patient or between patients with varying stages of cancer to identify potential diagnostic and prognostic biomarkers, respectively.In both cases, a number of differentially expressed candidate proteins will be identified and pathway analysis give insight in to how these proteins are associated with tumorigenesis, proliferation, metastasis and other cancer-driving processes [28].
In one of the pioneering clinical proteomic studies, Petricoin et al.,(2002) used surface-enhanced laser desorption-ionization time-of-flight mass spectrometry (SELDI-TOF MS) for diagnosing ovarian cancer [288].OVA1 was the first clinically approved biomarker discovered using SELDI-TOF MS in 2009 [289].Macklin et al., (2020) highlighted several clinical proteomic studies in different cancer phenotypes [28].A comparative proteome analysis of breast tumors arising from BRCA1deficient mouse models and -proficient triple-negative breast cancer (TNBC) identified differentially regulated nuclear protein complexes involved in homologous recombination (HR)-dependent DNA repair pathways and chromatin remodeling [290].The proteome changes were indicative for a rescue mechanism for the loss of HR repair.This study clearly illustrates how in-depth proteomics coupled to analysis of protein functions and networks can yield a potential diagnostic and prognostic signature in BRCA1-deficient breast tumors [1,290].Liu et al., (2014) performed one of the largest and most comprehensive clinical proteomics studies and identified a prognostic signature that foretell diseases recurrence in TNBC patients, with high sensitivity, specificity, and positive predictive value [1,291].
Several proteomics studies have also been performed to uncover the metastatic potential seen in cancer.A study by Obradović et al., (2019) revealed an increase in the levels stress hormone during breast cancer progression that causes an increased activity of the glucocorticoid receptor (GR) at distant metastatic sites, and ultimately reducing the survival rate [292].Elevated expression levels of the kinase ROR1 is one of the multiple metastatic processes activated by the increased GR activity.Depletion of ROR1 resulted in reduced metastasis and extended the survival rate in preclinical models, which is in support to this study [262].Similarly, Lignitto et al., (2019) reported an increased expression of BACH1, a pro-metastatic transcription factor, in lung adenocarcinoma [293].
Treatment resistance and development of specific and effective molecular targeted therapies are still the challenges in cancer treatment [262].Proteomic markers are also shown to be used in guiding the selection of appropriate cancer drugs and drug targets, paving the way towards personalized medicine [294].A study by Large et al., (2019) showed microtubule-associated protein 2 (MAP2) to be a potential biomarker for gemcitabine resistance in two cohorts of pancreatic ductal adenocarcinoma (PDAC) patients [295].Furthermore, the group found that gemcitabine-resistant PDAC cells are sensitive to taxane-based treatment.Studies have shown that different cancer cells that are resistant to anti-cancer agents exhibit a unique protein expression and molecular mechanisms correlated to the poor survival rate of patients (revised by Kwon et al., (2021)) [262].
Proteomics has also been employed in the diagnosis of brain cancer.A study by Gupta et al., (2019) revealed that the transcription factor YBX1 was overexpressed in glioblastoma (GBM, WHO Grade IV), a potential regulator involved in tumor metastasis [296].Another proteomic study reported that the level of CDH18, a novel tumorsuppressor, and its downstream targets were downregulated in patients with glioma than in healthy tissue [297].A recent study demonstrated that two proteins, chitinase-3-like protein 1 (CHI3L1) and glial fibrillary acidic protein (GFAP), to be a potential CSF Biomarkers for glioma patients [298].Kalinina et al., (2011) presented a comprehensive list of important findings on glioma proteomics [299].Furthermore, Kwon et al., (2021) presented list of representative proteomic biomarkers against different cancer types including liver, pancreas, ovary, breast, lung, myeloid leukemia [262].
Target verification and validation are the major hurdles for the translation of potential biomarkers identified from oncoproteomic data it to the clinic [44].Although hundreds of potential cancer biomarker candidates can be found in literature, only a limited amount of these 'interesting' biomarker candidates are approved by the Food and Drug Administration (FDA), as revised by Maes et al., (2015), and ultimately translated into a clinical test [14,300,301].For example, FDA approved human epididymis protein 4 (HE4) in 2009, a highly sensitive and specific marker for epithelial ovarian cancer as compared to CA-125, the 'gold standard' ovarian cancer detection [302].HE4 is found to be overexpressed in a number of tumours and currently used to monitor the recurrence and progression of epithelial ovarian cancer [261].Most of the FDA-approved tumor markers are blood-based markers and complement on the regular imaging modalities in discriminating between malignant and benign states [303].Most of the currently available cancer screenings tests usually lack sensitivity and/or specificity and the quest to find protein biomarkers able to perform early cancer diagnosis, is still ongoing [304].Most of the blood-based tumor markers are helpful for disease staging and monitoring as they are only efficient to detect late-stage tumors in patients with an established disease to monitor disease recurrence or reduction [300].However, most of the biomarkers are not cancer-type specific [305].For example, elevated levels of carcinoembryonic antigen (CEA) in blood is not specific to for CRC nor for malignancy and abnormal levels of CEA expression is also demonstrated in other cancer types and also in different inflammatory diseases [306].Advanced blood-based protein markers rely on 'panels of multiple biomarkers' rather than single proteins for improved diagnostic accuracy [307,308].Besides, FDA has approved blood-based protein markers in tissues and other non-invasive matrices, such as urine or feces [14].The findings are more often validated by antibody-based techniques in a larger independent cohort or implemented in clinical trials.

Mass spectrometry-based proteomics in the diagnosis of inherited metabolic disorders
Metabolic diseases are those that result from deficiency of enzymatic activities in the catabolism of amino acids, carbohydrates, or lipids [93,309].The method is a powerful tool to enhance newborn screening for more than 50 different metabolic disorders in one rapid test, as opposed to the conventional enzyme-or immunoassays, which required one test to detect one disorder [26,310].Furthermore, MS-based method have been reported to be a cost-effective approach for newborn screening [311].Impairment at the level of protein synthesis, stability, degradation, and signaling, all of which can play crucial roles in disease development, can be studied using proteomics technologies [312].Expression proteomics, structural proteomics, and functional proteomics are promising approaches in the search for diagnostic biomarkers and therapeutic targets in these diseases [313,314].In the last decade, SWATH-MS has emerged as powerful analytical systems designed for simultaneous detection and quantification of proteins differentially expressed between healthy controls and multiple inherited metabolic disorders [315].An organ-specific disease sampling can provide a more reliable source of potential diagnostic and therapeutic biomarkers than serum since organ-specific proteins released from diseased tissue are often diluted or degraded once they enter systemic circulation [316][317][318].
Recent studies have shown the potential of LC-MS/ MS-based proteomics approaches in the investigation of several rare genetic metabolic disorders including lysosomal storage diseases, peroxisomal disorder, amino acid metabolism, and inborn errors of metabolism, as summarized in Chantada-Vázquez et al., (2022) [312].Several studies have been conducted to look for different biomarker categories for lysosomal storage diseases [319].For example, SELDI-TOF based proteomics revealed apolipoprotein ApoCI to be differentially expressed in mucopolysaccharidosis (MPS) patients compared to controls.Proteomics has also been used to analyze mutations directly at the protein level, as shown in Gaucher disease [319].Furthermore, chitotriosidase protein (ChT) has been used as a biomarker for monitoring Gaucher disease [320].Despite several advancements in proteomic technologies, only limited studies are performed to explore the different biomarker categories associated to inborn errors of metabolism.In conclusion, the availability of detection technology including the MS is likely to significantly improve existing newborn screening tests will prove to be beneficial for the future generations.

Conclusion and future perspective
Although MS is still underutilized in various clinical settings, it is becoming a method of choice increasingly implemented in clinical laboratories with its multiplexing capacity, remarkable sensitivity and specificity, and potential for real-time in vivo analysis, which is often not produced by other analytical techniques [26,46].
It is widely used in reference methods development, therapeutic drug monitoring, toxicology, endocrinology, pediatrics, immunology and microbiology to identify and quantify biomolecules in a variety of biological specimens.This new era of various screening programs, new treatments, and detection technology will prove to be beneficial for the future generations [310].Furthermore, the pros and cons of these methods should be compared with traditional methods.Other desirable and practical features to be considered include high capital acquisition costs, requirement of skilled personnel, lack of automation, lack of direct bidirectional interface between MS instruments and laboratory information system, lack of standardization, and regulatory requirements [46,321].Operational factors such as standardized workflow, turnaround time, and comprehensive bio-computational data analysis and storage should also be considered.
The manufacturers and clinical MS community pursued significant progress in regard to regulatory requirements [322,323], standardization of methods [324,325], automation in instrumentation and data analysis [326,327], and flat file interface to laboratory information systems to facilitate seamless order-to-result workflows [328].Despite the remarkable promise, one of the major limitations of the clinical MS to date is the identification biomarkers at a very early stage.So far, most of clinical proteomics studies have been conducted when the disease is well manifested [26].Over all, future technological and instrumentation advancements, development of software packages and machine learning algorithms will propel novel clinical applications of MS to the forefront [26,46].

Expert opinion
The continual improvement and development of new ionization methods, instrumentation and techniques, and bioinformatics tools led to the emergence of novel applications of MS-based proteomics.These instrumental and methodological advances have revolutionized the application of MS-based proteomics in the clinical research, in the context of early disease diagnosis and characterization, drug development, biomarker discovery, and predicting prognosis and drug resistance analysis.
Proteomics based method is preferred over conventional methods mainly for its multiplexing capacity, remarkable analytical sensitivity and specificity, relatively shorter turnaround time, low sample cost and potential for real-time in vivo analysis.Furthermore, the emergence of improved sample preparation and protein quantification techniques combined with the appropriate data analysis pipeline involving machine learning algorithms will identify diseases specific signatures.These achievements will hasten the transition of MS to becoming a standard component of routine analysis and are expected to become the mainstay of clinical practice.
MSI is one of the emerging advancements in the field widely used for untargeted investigation of spatial distribution of biomolecules in different samples.The acquisition of images with high spatial resolution may reduce the pixel-by-pixel sampling speed, thereby increasing the overall image acquisition and analysis time.This strategy is implemented in clinical diagnostics, biomarker discovery and drug development.Another area where MS-based proteomics could play a role is in clinical microbiology laboratory, as a tool for both infectious diseases research and diagnostic purposes.In particular, its multiplexing capacity, specificity, sensitivity and low turnaround time will improve the quality of both clinical and epidemiological data.The method is crucial in for identification and typing of emerging microbial pathogens, antibiotic resistance analysis, exploring hostpathogen interaction and pathogenesis and formulating accurate treatment plans in time thereby controlling infectious diseases effectively.
The practices in oncology clinic have now been transformed through continuous discovery and validation of cancer biomarker, which are critically important in early diagnosis, risk stratification, and monitoring patient response to treatment.Oncoproteomics is more likely to reflect the comprehensive changes implicated in tumorigenesis than genomics and transcriptomics.This approach is already opening new avenues for the identification of novel biomarkers for early detection, targeted therapies, disease monitoring, and drug development, thereby advancing the implementation of personalized medicine.
Metabolic diseases are among the most serious medical problems that modern societies face.It includes a broad spectrum of biochemical alterations caused by cellular (genetic) defects and/or environmental factors which affects the structure and function of proteins involved in cellular metabolic pathways, thereby contribute to the pathogenesis of metabolic diseases.In this context, proteomic analysis has emerged as an indispensable tool to elucidate the complex molecular basis of various pathophysiological processes and protein dynamics through identification, quantification and structure characterizations of hundreds of proteins from a single complex biological sample.Metabolites and proteins are attractive diagnostic and therapeutic biomarkers in metabolic diseases since their concentration (deficiency or accumulation) is implicated in disease pathways.
The size and mobility of the MS systems are also the challenges in the transition of MS technique in on-site scenarios, such as ambulances and outdoors for POC diagnosis.The emergence new equipment like the miniature MS systems fill the gap by direct sampling in their native environment without pretreatment, thereby reducing turnaround time and the roles of skilled operators (mainly in sample preparation).Further progress in these areas will continue to provide researchers with new insights and technologies that will benefit the general population.The technology is rapidly advancing and could be amenable to automation, user-friendly protocols that would translate well to the clinic.The advantages and limitations MS-based clinical proteomics over traditional methods need to be established and communicated among clinical laboratory technicians, researchers, and other potential users of these novel methods.
For the proper clinical implementation of all these achievements, operational factors and other desirable practical features such as automation, standardized protocols and software packages, machine learning algorithms, comprehensive bio-computational data analysis and storage should also be considered.These recent developments with others will advance the translation of MS from analytical chemistry to clinical labs to provide POC service and personalized treatment for patients in future.Furthermore, as these instrumentation and technologies become more automated, accessible and affordable with certain MS platforms already well-entrenched in research or clinical laboratories, clinical proteomics has a great future ahead for improving disease diagnosis, prognosis, monitoring and prediction of therapeutic outcome.

Fig. 1
Fig. 1 Current developments in Mass spectrometry-based clinical proteomics in sample preparation, MS technologies, bioinformatic tools, major advantages and the challenges that have to be considered

Table 1
Examples of LC-MS/MS-based FDA approved tests in clinical laboratory